YSA Series Plastic Magnetic Valve
manufacturer: Shanghai MeiYan Yi Pump & Valve Co., Ltd.
Eml: sales@1bengfa.com
Tel: +86 (21) 5640 2009
Mob: +86 138 1691 3072（WeChat Same Account）
product drawing
YSA series plastic magnetic valves
Dimensions & constructral diagram
YSA series plastic dimension drawing(pic1)
YSA series plastic dimension drawing(pic2)
| type | YSA40 | YSA50 |
| thread G | 1 " | 2" |
| diameter (mm) | 40 | 50 |
| CV value | 28 | 48 |
| L（mm) | 151 | 170 |
| H（mm) | 130 | 140 |
| Ф1（mm) | 62 | 75 |
| Ф2（mm) | 40 | 50 |
| Ф3（mm) | 112 | 130 |
| mediumtemp.℃ | 0~60℃ | |
| pressure（DP） | 0.1kgf/cm2～8 kgf/cm2 | |
| max.compression resistance | 12kgf/cm2 | |
| rated voltage | 220VAC/50HZ 110VAC/50HZ DC24V； other can be customized , up-down float:-15%～+10% | |
| YSA，G11/2〞~G2〞 medium： liquid,water,gas mediumtemp.：0~60℃ acting model： pilot type pressure：liquid：0.1 kgf/cm2~8kgf/cm2 |
body material：reinforcing nylon PA diaphragm seal，diaphragm material：（NBR） coil protection grade：plastic-seal coil IP65 |
| Product use: Suitable for water, liquid, gas, water and dilution of agricultural pesticides, the effects of such as medium, realize automation control switch. Characteristics: 1, installation technique in the power switch, under emergency, manual operation of valves. 2, the valve is installed filter and flow adjusting switch. |
|
